Micromod MOD: 30MLTraining Manual - Manual (Page 153)

Training Manual
Debug Lab
9.3.2 Part B – Instrument Status Viewer
1. Start the Instrument Status Viewer:
• Select Instrument – Status from the menu bar at the top. This will display the
Communication Setup dialog as shown below:
Figure 9 .9.
Communication
Setup
• This will show the Server name and the Device name in the respective fields. Just
make sure these are correct.
• Click on OK. This will start the Instrument Status display as shown below:
Figure 9 .10.
Instrument Status
• This Instrument Status display has a text field to enter commands and a set of
buttons.
2. Read the status of the instrument:
9 - 7