Micromod MOD: 30MLTraining Manual - Manual (Page 71)

Training Manual
ViZapp Setup Lab
8. Select Components for installation: The ViZapp Software package consists of the main
software and a few options. You can choose the options at the time of setup. The Select
Components choices will vary depending on which version of ViZapp is being installed.
By default, all available options are selected. Note that selecting On-line Documentation
installs all documentation onto the hard drive. Otherwise, it will be necessary to have the
CD in the drive to access the documents.
These options will be displayed as check boxes on the dialog box. See the next figure for
example.
This dialog box also shows the space required on the hard disk to install the selected
options and the total free space on the disk. Accept the defaults and then click on Next to
continue.
Figure 5 .11.
ViZapp Setup –
Select Components
9. Choose the Program Folder: The ViZapp setup will also create a program folder and
will create program shortcuts inside that folder. You can use these shortcuts to start the
programs. The default program folder that will be automatically created will be:
MicroMod Automation\ViZapp.
If you want to create a new program folder you can type its name in the Program
Folders field on this dialog box. If you want to use one of the existing program folders,
you can choose it from the Existing Folders list box on this dialog box by clicking on
it.
5 - 7