Micromod MOD: 30MLTraining Manual - Manual (Page 209)

Training Manual
Supervisory Message Lab
7. In the Interface File Filename field, click on the Refresh icon A list of available MIF files appears
8. Click on the SEQUENCE.MIF file and click Open
9. Click OK to close the Extended Modbus Device Properties
window
10. Return to ViZapp and download the database to the controller The PID-100 display should be on the
controller front panel, with the control
loop in manual and a setpoint of 0.
Refresh icon Refresh icon
E – TEST THE CONFIGURATION
We do not have a display for the Sequence, but we can use the ViZapp debug function to test the Supervisory Message
configuration.
1. Open the BATCH compound
2. On the top toolbar select Project / Start Debug Mode
13 - 11