Micromod MOD: 30MLTraining Manual - Manual (Page 48)

Training Manual
Single Loop Template Lab
3 Press NXT until “GAIN” is displayed on
line 1. Set Gain at 0.65. Then press
ENT. 0.01 to 125.0
Proportional response in a fixed gain controller.
4 Press NXT, set Reset at 30.00 then
press ENT 0.01 to 125.0
Reset in repeats per minute.
5 Press NXT until INITIAL MODE is
displayed on lines 1 and 2.
6 Set Mode to AUTO. Then press ENT
7 Press NXT until lines 2 and 6 are blank
and only the up arrow is on.
COMPOUND
will be displayed on Line 1
8 Press UP. This completes the Control section
9 Press NXT This takes you to the OUTPUT section of the
configuration tree.
3 - 22