Micromod MOD: 30MLTraining Manual User Manual
Page 246
Training Manual
Piecewise Linearization Lab
15. Click OK to close the block.
E - CONNECT THE BLOCKS
Step
Procedure
Comments
16. Connect the output (OP) of LIC-100 PID block to the Input of
the FW LN linearization block.
17. Select the connection icon again and double-click on the
STM/FW piecewise block
A menu of possible connections appears
18. Select TABLEOUT from the menu
19. Drag the cursor into the FW LN block and select the block
20. The only possible connection is TABLEIN; this is done
automatically by ViZapp. Click on this connection.
21. Return to EDIT mode by selecting the arrow on the right toolbar
22. To check your connection, open the Linearization block and
select the INCOMING tab.
F – COMPILE THE DATABASE:
Save and compile your database. It is not necessary to download at this time since we have not yet
constructed a display to view the coordinates.
18 - 6