Micromod MOD: 30MLTraining Manual User Manual
Page 171
Advertising
Training Manual
Peer-to-Peer Communications
Alarm Block
Connection Menu
• Drag the line from the PID block directly over the middle of the OC block
• Click on the OC block: the Parameter connection list will appear.
• Double-click on INPUT
OC Block
Connection Menu
• The connection will now be complete. The connection line will have the source name and
destination name displayed right on it as shown in the figure below. The output signal from the
PID block will be sent to the other instrument on the ICN for use in its control strategy.
10 - 15
Advertising
This manual is related to the following products: