Micromod MOD: 30MLTraining Manual - Manual (Page 66)

Training Manual
ViZapp Setup Lab

5.2 Instructions:
The following procedure explains how to install ViZapp on your computer.
ViZapp Setup will install a Microsoft Software component called MDAC (Microsoft Data
Access Components) if the minimum required version was not present in the system
already. This program is required by the ViZapp Reports. MDAC is also installed by other
Microsoft and third party programs.
ViZapp also requires another software package called OPC Core Components.
The above programs are installed by ViZapp in the background during ViZapp Setup and
do not require any user inputs.
Close all applications that are running in your computer currently before starting the
ViZapp setup. If a previous installation of ViZapp exists, uninstall it and reboot
before continuing. This can be done through the Control Panel’s Add/Remove
Programs.
Uninstalling ViZapp will not delete user files or the Gallery
5.2.1 ViZapp Setup
1. Insert MicroMod Systems Software CD into the CD-ROM drive.
If the Master Setup shell does not launch automatically, select Run from the Start Menu
of Windows. The Run dialog box will appear as shown below:
Figure 5 .1.
Run dialog box
Type D:\SETUP.EXE or E:\SETUP.EXE, (CD DriveLetter:\Setup.exe depending on
the letter you use for the CD-ROM drive) and click on OK or press ENTER . The Master
Setup screen shown below should appear.
5 - 2