Micromod MOD: 30MLTraining Manual - Manual (Page 217)

Training Manual
Totalizer Display Lab
input as shown below, then click OK to close the
menu
The analog input from the PID block
(PVI) is a Floating Point variable.
TotalL is the name of the Format, which
will be defined in the next activity.
Bar format name is left blank because we
will not display this value as a bargraph.
17. Click on the Add button and configure the new clear
input as shown below, then click OK to close the
menu clear is the name of the input.
This will be a discrete input from the
keypad on the controller.
clearL is the name of the Format, which
will be defined in the next activity.
Bar format name is left blank because we
will not display this value as a bargraph.
18. Select the Formats tab, click on the Add button and
configure the format for the Total value:
15 - 3