Micromod MOD: 30MLTraining Manual - Manual (Page 50)

Training Manual
Single Loop Template Lab
Figure 3 .24.
8 Set limit to 100.0 and
press ENT
9 Press NXT until Line 2 displays OUTPUT
INIT VAL This is the initial value of the output on
download
10 Change the initial value to 50
11 Press NXT until COMPOUND is displayed on
line 1
12 Press UP This completes the output section.
13 Press NXT This takes you to the ALARM section of the
configuration tree. We will not setup any
process alarm in this lab.
14
Press NXT
COMPOUND
is displayed on line 1 and LIST on line
2.
3 - 24