Micromod MOD: 30MLTraining Manual - Manual (Page 244)

Training Manual
Piecewise Linearization Lab
C - CONFIGURE THE PIECEWISE TABLE BLOCK
6. Double-click the PW block to open it.
7. Type STM/FW in the Name field and type a Description such as:
linearize steam flow to feedwater valve position
8. Click the Add button in the right of the PW Properties menu The Specify Point Data dialog box
appears
9. Click OK. The X and Y coordinates for the first point are added
to the block.
Since the actual values would almost
always change when the controller is
installed and commissioned, we will use
linear values for initial configuration.
10. Create 8 more points using the Add button, with the following
coordinates:
18 - 4