Micromod MOD: 30MLTraining Manual - Manual (Page 87)

Training Manual
PID Loop Lab
Figure 6 .9.
Instrument Versions
• Select MOD 30ML 2 from this list as our instrument version by clicking on it and
then click on the Close button.
• The Configurator will redisplay as shown below. The instrument database will be
opened on the right frame and the default blocks (IF, SE, ST and DIF) for the
MOD 30ML database will be loaded.
• Notice that the newly created document PIDLAB is shown in the project tree
attached to the Project Class.
Figure 6 .10.
Default instrument
database
• The algorithm blocks belonging to the instrument version selected will be shown
as a menu on the left frame.
6 - 7