Micromod MOD: 30MLTraining Manual - Manual (Page 22)

Training Manual
MOD 30ML Operation Lab 2

You can display and manipulate on one instrument, all process and calculated values
associated with the process unit, including both sequence and continuous control.
2.3.3 View the Tuning displays and change the batch recipe:
3 Display tuning pages for TIC-100
and TIC-101.
First switch to the control display
(TIC-100 or TIC-101) and then hold
down Scroll key to access the tuning
display. Tuning displays for controller algorithm type,
controller action, gain, reset
Commissioning activity can take place through
front panel of instrument.
4 Display recipe selection by returning
to main batch display and holding
down scroll key.
Enter tuning password of 1 (if
required; the tuning password from
the previous activity may still be in
effect)
Select recipe 1 using UP/DOWN
arrows and press ENT (Scroll key).
Press NXT key to view recipe
parameters
Change Recipe 1 target level to 15
inches water. See the next figure. This is a tuning display within the main batch
display to select and change the recipe for the
batch.
Once tuning password is entered the recipe can be
scrolled between the choices of Recipe 1 and
Recipe 2
You can view and change the following
parameters: Reaction temperature setpoint entry,
Reactor level, Fill A rate, Fill B rate
Figure 2 .5.
Recipe Tuning
display
2 - 6