Micromod MOD: 30MLTraining Manual - Manual (Page 60)

Training Manual
MOD 30ML Diagnostics Lab
7 Press the SCROLL key ONCE. The PID setpoint will be shown on line 6 and the
text “SP” on line 5.
8. Press the SCROLL key twice more
and wait for a few seconds. The runtime PID display will disappear and FAILURE
will be displayed on line 1 with an audible
continuous alarm.
At this point, you cannot operate the PID loop or
use the controller.
This is an indication that the controller is in
SHUTDOWN mode.
4 - 8