Micromod MOD: 30MLTraining Manual - Manual (Page 137)

Training Manual
Extended MODBUS OPC Server
We will add a device to this database. We will save this database later.
Figure 8 .1.
MICROMOD
Extended MODBUS
OPC Server
3. Add a hardware device to the database: Click on the New XMODBUS Device button
on the toolbar or select Add-New XMODBUS Device from the menu bar at the top. This
will open the Extended MODBUS Device Properties dialog box as shown in the figure
below:
• We will configure the properties of the MOD 30ML device we are adding in this
dialog box.
Figure 8 .2.
Add new Extended
MODBUS Device
8 - 3