Micromod MOD: 30MLTraining Manual - Manual (Page 111)

Training Manual
PID Loop Lab
• Click on the New button on this block as shown in figure below:
Figure 6 .46.
Closing Compound
• A text edit box will appear in the area below and you will see a text edit cursor
blinking.
• Type the name of your display tag (FIC-100). Refer to the next figure.
• Click on the OK button when you are done.
a
If you had more than one display blocks in your configuration, you will need to add
their display tags in the DIF block as explained in the above step. The order in which
the display tags appear in this list is the order in which the displays will scroll when
you press the Tag button on the instrument. The display block gets executed by the
instrument when it is loaded on the face of the instrument. If you did not add the
display tag of a display block to this list, that display will not appear on the instrument
when you press the Tag button.
6 - 31