Micromod MOD: 30MLTraining Manual - Manual (Page 189)

Training Manual
Sequence Lab
Figure 12 .15.
SEQ Properties -
Outputs Tab
• The Outputs tab will be displayed next as shown above. Click on the Add button on this
tab. The Specify Output Data dialog will be displayed next.
Figure 12 .16.
Specify Output
Data dialog
• Type ChargeV for the name of this output and select Data Type as Discrete. This output
will be locally generated and will be connected to the Charge valve via a digital output
module.
• Click on OK. This added output will be displayed in the Outputs list as shown below:
12 - 11