Micromod MOD: 30MLTraining Manual - Manual (Page 45)

Training Manual
Single Loop Template Lab
16 Press NXT
HI QUAL
is displayed on line 2. Result is set BAD if
it goes above this value. High quality must be
higher than the low quality value
17 Set line 6 at 220. Then press ENT
18 Press NXT until line 2 and 6 are blank
and
only the up arrow is on
19 Press UP
20 Press NXT This completes the Process Input section. SETPT
will be displayed on line 2.
Figure 3 .19.
3 - 19