Micromod MOD: 30MLTraining Manual User Manual
Page 96
Training Manual
PID Loop Lab
• Select File – Save All from the menu bar. This will save the document, the project
file and the workspace file.
Note that Save only saves the currently opened document. Unless you have made
changes in other documents that you do not wish to save, you may select Save-All
instead.
13. Continue configuring the other blocks. Double-click on the PID block. Give the block the
tag name FIC-100.
• Change the Process Input range to 0 and 200. Type the description as shown in the
next figure. Note that the default Control Action is Reverse.
Figure 6 .22.
PID Block
• Click on the Setpoint tab at the top of this block to configure the setpoint for this
control loop. The Setpoint page will display as shown in the next figure:
6 - 16