Micromod MOD: 30MLTraining Manual User Manual
Page 184
Advertising
Training Manual
Sequence Lab
Figure 12 .7.
MOD30ML I/O
Graphic
• Double-click on the TE block on this I/O Graphic. This will open the WRIM Properties
dialog. Notice the change in the Module Slots on this dialog.
Figure 12 .8.
WRIM Properties
• Click on OK to close the WRIM Properties dialog.
• Close the I/O Graphic by clicking on the close button (X)
12 - 6
Advertising
This manual is related to the following products: