Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1198)

1144 Brocade Network Advisor IP User Manual
53-1002947-01
Preconfigured policy monitors
38
Management policy monitor
The management policy monitor enables you to set a policy monitor on the Management
application.
Check to see if the server backup is enabled and working — This management policy monitor
enables you to determine if backup is enabled for the Management application server and if the
backup output directory is accessible and writable.
Server backup automatically backs up the Management application database on a user-defined
schedule.
Rule Violation Fix — If the policy monitor report shows a violation, the Administrator can edit the
backup configuration through the Options dialog box, Server Backup pane (Server > Options). Refer
to
“Management server backup” on page 139.
Preconfigured policy monitors
The Management application provides preconfigured policy monitors. The preconfigured policy
monitors include the following:
Default IP Policy — Available for SAN products and contains the following values:
• Name — Default IP Policy
• Description — Default policy to run on all IP targets
• Frequency — Weekly
• Next Run — Next time the policy will run using the format:
<Day_of_Week><Month><Date><Time_in_24_Hour_Format><Time_Zone><Year>. For
example, Fri Jun 08 08:00:00 PDT 2012.
• Last Run — Empty
• Result — Empty
• Rule — The default IP policy is configured with the following rules:
- All profiles are the same on each RBridge in an Ethernet fabric
- Event registration
- Predefined rules – “No Interface Shutdown Rule” and “Port Profile Interface Rule”
- Management application backup enabled
• Targets — The default IP policy is configured with the following targets:
- Fabric Checks — All Fabrics
- Switch/Router Checks — IP Wired Products and Wireless Controllers product groups