Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 475)

Brocade Network Advisor IP User Manual 421
53-1002947-01
Configuration repository management
14
Replicating security configurations
NOTE
Only available for Fabric OS products.
NOTE
This feature requires a Trial or Licensed version.
You can replicate an AD/LDAP Server, DCC, IP, RADIUS Server, or SCC security policy.
Select Configure > Configuration > Replicate > Security.
A wizard is launched to guide you through the process. The first step of the wizard, Overview,
displays. There are seven steps in the Replicate Switch Security Policy Configuration wizard:
1. Overview, which describes the wizard.
2. Configuration Type, which allows you to select the type of configuration you wish to replicate.
For more information about the fields and components of this step, refer to Table 47 on
page 422.
3. Select Source Switch, which allows you to select the source device of the security policy
configuration you wish to replicate. For more information about the fields and components of
this step, refer to
Table 48 on page 422.
4. Select Destination Switches, which allows you to select the destination devices. Only devices
that can accept the selected security policy configuration display. For more information about
the fields and components of this step, refer to
Table 49 on page 423.
5. Validation, which lists the configuration settings that you can validate before you replicate. For
more information about the fields and components of this step, refer to Table 50 on page 423.
Current Firmware The current firmware.
Status The status of the switch .
TABLE 45 Step 6. Validation
Field/Component Description
Validation Settings table The replication settings that have been configured in previous steps; for
example, the configuration type, source configuration, and destination
settings. Click Finish to approve the settings.
Disable Destination Switch check box Select to disable the destination switch during replication.
TABLE 46 Step 7. Summary
Field/Component Description
Summary table The replication settings that have been successfully applied to the
selected destination switches; for example, the configuration type,
source configuration, and destination settings. Click Close to close the
dialog box.
TABLE 44 Step 5. Destination Switches (Continued)
Field/Component Description