Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 63)

Brocade Network Advisor IP User Manual 9
53-1002947-01
Management server and client
1
Viewing active sessions
To view the Management application active sessions, complete the following steps.
1. Select Server > Active Sessions.
The Active Sessions dialog box displays ( Figure 5 ).
FIGURE 4 Active Sessions dialog box
2. Review the active session information.
The following information displays:
• ID — Displays the name of the user (for example, Administrator).
• Description — Displays the description of the user (for example, Operator).
• Network Address — Displays the network address of the user.
• Client Type — Displays the type of Management application client.
• Connected — Displays the date and time the user connected to the server.
3. Click Close.
Disconnecting users
To disconnect a user, complete the following steps.
1. Select Server > Active Sessions.
The Active Sessions dialog box displays.
2. Select the user you want to disconnect and click Disconnect.
3. Click Yes on the confirmation message.
4. The user you disconnected receives the following message:
The Client has been disconnected by User_Name from IP_Address at
Disconnected_Date_and_Time.
5. Click Close.
When you disconnect a client from using the Active Sessions dialog box, the following event
displays in the Master Log: Disconnect Client
User_Name @ IP_Address .