Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 391)

Brocade Network Advisor IP User Manual 337
53-1002947-01
IP topology map components
9
Deleting a background image from the library
You can only delete images not in use in any topology or by any user. To delete a background image
to a Topology Map, complete the following steps.
1. Click Map on the Topology Map tool bar.
The Topology Background Map dialog box displays.
2. Select the image you want to delete in the Image Library list and click Delete.
3. Click OK on the Topology Background Map dialog box.
4. Click Yes on the confirmation message.
Exporting the topology
To export a Topology Map as an image file, complete the following steps.
1. Click the Export icon on the Topology Map tool bar.
The Export dialog box displays.
2. Browse to the location where you want to save the map image.
3. Enter a name for the map in the File Name field.
4. Select the export file type in the File of Type list.
Options include: PNG, GIF, JPG, BMP, PDF, and EMF.
5. Click Save.
Printing a map
To print a Topology Map, complete the following steps.
1. Click the Print icon on the Topology Map tool bar.
The Print dialog box displays.
2. To configure the page setup, click Page on the Print dialog box.
The Page Setup dialog box displays.
a. Select the page size from the Size list.
b. Select the source from the Source list.
c. Select Portrait or Landscape from the Orientation area.
d. Enter the top, bottom, left and right margins in the Margins area.
e. Click OK on the Page Setup dialog box.
3. To zoom in and out, click Zoom In or Zoom Out.
4. To set a specific zoom, select an option from the list.
Options include: Fit, Fit Width, 10%, 25%, 50%, 60%, 70%, 80%, 90%, 100%, 200%, 300%, or
400%.