Creating a new user account – Brocade Network Advisor IP User Manual v12.1.0 User Manual
Page 251
Brocade Network Advisor IP User Manual
197
53-1002947-01
User accounts
7
Creating a new user account
To create a new user account, complete the following steps.
1. Select Server > Users.
The Users dialog box displays.
2. Click Add under the Users table.
The Add User dialog box displays.
FIGURE 78
Add User dialog box
3. Enter a unique name to identify the user in the User ID field.
4. Enter a password for the user in the Password and Confirm Password fields.
Passwords displays as dots (.). For password policy details, refer to
5. Select the Account Status - Enable check box to enable the account of the user.
Account Status is enabled by default.
6. (Optional) Enter the full name of the user in the Full Name field.
7. (Optional) Enter a description for the user in the Description field.
8. (Optional) Enter the phone number of the user in the Phone Number field.
9. Select the E-mail Notification - Enable check box to enable e-mail notification for the user.
E-mail Notification is disabled by default.
10. Click Filter to set up basic event filters for the user.
For step-by-step instructions about setting up basic event filters, refer to