Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 220)

166 Brocade Network Advisor IP User Manual
53-1002947-01
Software Configuration
6
3. Choose one of the following options in the Server IP Configuration list.
• Select All. Go to step 4 .
• Select a specific IP address. Continue with step 5 .
• Select localhost. Continue with step 5 .
4. Select the return IP address in the Client - Server IP Configuration Return Address list.
When Server IP Configuration is set to All, you can select any available IP address as the
Return Address. If you select a specific IP address, the Return Address field shows the same IP
address and you cannot change it.
5. Click Apply or OK to save your work.
NOTE
Changes take effect after you restart the Management Server.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 12.X.X > Server Management Console).
6. Click OK on the “changes take effect after “application restart” message.
IP preferences
You can configure the following preferences for IP products.
• Configuring change manager preferences . . . . . . . . . . . . . . . . . . . . . . . . . 167
• Configuring custom report preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
• Configuring deployment preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
• Configuring deployment report preferences . . . . . . . . . . . . . . . . . . . . . . . . 168
• Configuring image repository preferences. . . . . . . . . . . . . . . . . . . . . . . . . . 169
• Configuring MPLS management preferences . . . . . . . . . . . . . . . . . . . . . . . 169
• Configuring MPLS polling service preferences . . . . . . . . . . . . . . . . . . . . . . 169
• Configuring name service preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
• Configuring polling service preferences. . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
• Configuring sFlow accounting preferences . . . . . . . . . . . . . . . . . . . . . . . . . 170
• Configuring sFlow data collector preferences . . . . . . . . . . . . . . . . . . . . . . . 170
• Configuring sFlow monitoring preferences . . . . . . . . . . . . . . . . . . . . . . . . . 171
• Configuring SSL certificates preferences . . . . . . . . . . . . . . . . . . . . . . . . . . 171
• Configuring SNMP preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
• Configuring syslog file reader preferences . . . . . . . . . . . . . . . . . . . . . . . . . 172
• Configuring TFTP preferences. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172