Deleting a policy monitor, Configuration rules, Deleting a policy monitor 4 – Brocade Network Advisor IP User Manual v12.1.0 User Manual
Page 1208: Configuration rules 4, Viewing a predefined configuration rule
1154
Brocade Network Advisor IP User Manual
53-1002947-01
Deleting a policy monitor
38
4. Change the description of the policy in the Description field.
The description cannot be over 128 characters. It cannot include asterisks.
5. To edit the policy monitor checks, repeat
of
6. Click OK on the Edit Monitor dialog box.
The updated policy monitor displays in the Monitors list of the Policy Monitor dialog box.
7. Click Close on the Policy Monitor dialog box.
Deleting a policy monitor
To delete an existing policy monitor, complete the following steps.
1. Select Monitor > Policy Monitor.
The Policy Monitor dialog box displays.
2. Select the policy you want to delete in the Monitors list.
3. Click Delete.
4. Click Yes on the confirmation message.
5. Click Close on the Policy Monitor dialog box.
Configuration rules
A configuration rule is a logical expression built with configuration conditions and blocks. You can
use configuration rules to perform a configuration compliance check against a baseline (such as a
product’s backup configuration file).
Viewing a predefined configuration rule
You can view detailed information about predefined configuration rules on the Add Monitor or Edit
Monitor dialog box.
1. Select the predefined configuration rule you want to view.
The configuration rule displays in the Details area.
2. Review the configuration rule.
For specific detailed information about the predefined rules, refer to