Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 252)

198 Brocade Network Advisor IP User Manual
53-1002947-01
User accounts
7
11. Enter the e-mail address of the user in the E-mail Address field.
Enter more than one e-mail address, separating each with a semi-colon. To send a text
message or page via e-mail, use the following format number@carrier.com, where number is
your phone number and carrier.com is the SMS server. For example, [email protected]
(text message) or [email protected] (page).
NOTE
Check with your carrier for the exact e-mail address.
12. Assign roles and AORs by selecting the role or AOR in the Available Roles / AOR table and click
the right arrow button to move the role or AOR to the Selected Roles / AOR table.
Select multiple roles or AORs by holding down the CTRL key and clicking more than one role or
AOR.
13. Remove roles and AORs by selecting the role or AOR in the Selected Roles / AOR table and click
the left arrow button to move the role or AOR to the Available Roles / AOR table.
Select multiple roles or AORs by holding down the CTRL key and clicking more than one role or
AOR.
14. Click OK to save the new user and close the Add User dialog box.
The new user account displays in the Users table of the Users dialog box. You must assign at
least one role to a user account. Users without an assigned role cannot log into the client.
15. Click Close to close the Users dialog box.
Editing a user account
To make changes to an existing user account, complete the following steps.
1. Select Server > Users.
The Users dialog box displays.
2. Select the user account you want to edit and click Edit under the Users table.
The Edit User dialog box displays.
3. Complete step 3 through step 13 in “Creating a new user account” on page 197.
4. Click OK to save the user account and close the Edit User dialog box.
If you make changes to the user’s role or AOR while the user is logged in, a confirmation
message displays. When you click OK on the confirmation message, the user is logged out and
must log back in to see the changes.
5. Click Close to close the Users dialog box.