Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 879)

Brocade Network Advisor IP User Manual 825
53-1002947-01
Product configuration templates
27
5. Click the CLI Command tab and complete the following steps.
FIGURE 301 CLI Template dialog box - CLI Commands tab
a. (Configuration templates only) Select the Evaluate CLI responses check box to validate the
CLI commands.
You can prefix a dash (-) to a CLI command to ignore command validation even when you
select the Evaluate CLI Response check box.
Clear the check box to send all CLI commands to the device regardless of the success or
failure of the previous command.
b. Enter CLI commands in the CLI Commands text area.
For a list of guidelines to use when entering CLI commands, refer to “CLI command
guidelines” on page 831.
The Management application provides several CLI command examples (including ACL,
MPLS, Network OS-AMPP, Network OS-QS, MISCELLANEOUS, MCT, Network
OS-THRESHOLDING, HYPEREDGE, VRF, PRIVATE VLAN, Ironware OS VLAN, Network OS
VLAN). To view the CLI command examples, navigate to the Examples of CLI Commands
folder (refer to
“CLI Templates” on page 1375).
Add commands from the CLI templates or examples by selecting one or more commands
from the CLI Templates or Examples of CLI Commands folder and clicking the right arrow
button.