Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1357)

Brocade Network Advisor IP User Manual 1303
53-1002947-01
IP main menus
A
Application Delivery. Select to choose an application
delivery method.
VIP Servers. Select to monitor and configure real and
virtual servers.
GSLB. Select to create global server load balancing
(GSLB) policies.
SSL Certificates. Select to manage SSL certificates.
MPLS. Select to configure the multiprotocol label
switches service (MPLS).
VLL. Select to configure virtual leased line (VLL) services.
VPLS. Select to configure virtual private LAN services
(VPLS).
VCID Pool. Select to create a pool of virtual circuit
identifiers (VCID).
LSP. Select to configure label switched path (LSP).
Firmware Management. Select to launch the Image
Repository.
DCB. Select to manage a DCB switch, port, or link
aggregation group (LAG).
FCoE. Select to manage an FCoE port.
Host. Select to manage a selected host.
Adapter Software. Select to launch HCM.
Adapter Ports — Select to configure Host Adapter ports.
Packet Capture (Pcap). Select to configure packet
capture.
Policy Based Routing — Select to configure policy-based
routing.
Security. Select to manage security.
L2 ACL. Select to configure Layer 2 Access Control Lists
on products and ports.
L3 ACL. Select to configure Layer 3 Access Control Lists
on products and ports.
MAC Filter. Select to configure Media Access Control
filters on products and ports.
ACL Accounting. Select to enable or disable ACL
accounting and clear counters.
VLANs. Select to launch the VLAN Manager.
Zoning. Select to configure zones.
Fabric. Select to configure fabric zones.
LSAN Zoning (Device Sharing). (Trial and Licensed version
Only) Select to configure LSAN zones.
Menu Command Command Options