Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 243)

Brocade Network Advisor IP User Manual 189
53-1002947-01
Fabric tracking
6
FIGURE 75 Accept changes summary message
• Do not show me this again check box — Select if you do not want to see this dialog box
again when you enable or disable fabric tracking or accept changes for a switch or fabric.
• Switches — This table shows a brief summary of the switches including status (whether the
device port will be added (
) or removed ( ) from the fabric), name, fabric name,
IP address, WWN, and domain ID. This table includes unmonitored switches which
becomes segmented from the fabric.
• Device Ports — This table shows a brief summary of the device ports including status
(whether the device port will be added (
) or removed ( ) from the fabric), reason
(why the device is missing), product type, port, fabric name, port WWN, node WWN, and
attached port number.
• Connections — This table shows a brief summary of the switch connections including the
status (whether the device port will be added (
) or removed ( ) from the fabric),
reason (why the connection is missing), and connection type as well as the fabric name,
WWN, domain ID, IP address, and port number of the connected switches.
2. Click Yes to accept changes.
Accepting changes for all fabrics
1. Accept the changes to all fabrics by choosing one of the following options:
• Click in the white space on the Connectivity Map and select Monitor > Accept All Changes.
• Right-click in the white space on the Connectivity Map and select Accept All Changes.
The accept changes summary message displays ( Figure 76 ). This message includes the
following information: