Brocade Network Advisor IP User Manual v12.1.0 User Manual
Page 1419
Brocade Network Advisor IP User Manual
1365
53-1002947-01
Host properties
E
Class of Service
The class of the port; for example, Class-2 or Class-3.
Switch
The name of the switch.
Fabric
The name of the Fabric.
VM Port Name
The port name of the virtual machine associated with the host.
Preboot Created
Indicates whether preboot was created on the virtual port.
PCI Function Index
The PCI function number associated with the physical port.
Fabric Assigned Address
The state (enabled or disabled) of the fabric assigned address for
the adapter.
WWN Source
The source of the world wide name. Options include:
Fabric — The WWN is assigned from the fabric. The fabric assigned
address must be enabled.
Factory — The WWN is assigned at the factory.
Configuration
Configured State
Indicates whether the port is enabled or disabled.
Max Bandwidth
The maximum allowable bandwidth output for the selected port.
Operating State
Indicates whether the port is online or offline.
Configured Speed
The configured port speed.
Operating Speed
The speed at which the port is operating.
Max Speed Supported
The maximum speed that is supported on the port. For the FC port,
the maximum speed is 8 Gbps.
Configured Topology
The configured topology setting: auto, point-to-point, or loop.
Operating Topology
The operating topology setting: auto, point-to-point, or loop.
Boot over SAN
Indicates whether boot over SAN is enabled.
Receive BB Credits
The number of buffer credits received.
Transmit BB Credits
The number of buffer credits transmitted.
IOC ID
The IO Controller identifier.
Frame Field Size
The frame size, in bytes, of the port.
Hardware Path
The hardware path of the HBA.
Virtual Port Count
The number of virtual ports associated with the HBA.
Operating State
Displays details about the state of the following operating
parameters:
•
Beacon State
•
Link Beacon State
•
MPIO Mode State
•
Path Time Out
•
Logging Level
•
Target Rate Limit
•
Default Rate Limit
FC-SP
Authentication
Indicates whether FC-SP authentication is enabled or disabled.
TABLE 31
Adapter port properties (Continued)
Field
Description