Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1413)

Brocade Network Advisor IP User Manual 1359
53-1002947-01
IP device properties
E
ACL Displays the type of access control list (ACL) profile (Standard or
Extended), if an ACL is associated with the port profile.
Associated MACs list Lists the following details of the Media Access Control (MAC) addresses
associated with the port profile:
•
MAC — The MAC address associated with the port profile.
•
Name — The name of the vNIC associated with the selected MAC
address.
•
Switch Port — The switch port associated with the selected MAC
address.
•
VM — The virtual machine associated with the selected MAC
address.
•
vNIC — The virtual network interface card (vNIC) associated with the
selected MAC address.
•
Port Group — The port group associated with the selected MAC
address.
•
vCenter — The virtual center associated with the selected MAC
address.
Add button Click to launch the Assign MACs dialog box, which you can use to select
discovered MACs and add offline MACs for the selected port profile.
Delete button Click to delete the selected MAC from the port profile list.
Compare button Click to launch the Profile Comparison Summary dialog box, where you
can compare selected products to profiles using filtered criteria.
VLANs tab
Port Mode The switch port mode of the port profile (access or trunk).
Configuration One of the following VLAN configuration options:
•
All — Indicates that the port profile will allow all VLAN IDs.
•
None — Indicates that the port profile will not allow any VLAN IDs.
•
All Except <VLAN IDs> — Indicates that the port profile will allow any
packet except the VLAN IDs specified.
•
<VLAN IDs> — Indicates that the port profile will allow any packet
with the VLAN IDs specified.
Untagged VLAN The port VLAN assigned to the interface as untagged.
NOTE: An untagged port can be a member of only one VLAN.
Tagged VLANs The port VLANs assigned to the interface as tagged.
NOTE: A tagged port can be a member of more than one VLAN.
QoS tab — DCB mode
Mode The mode of Quality of Service (QoS) assigned to the port (DCB).
DCB Map The DCB map name.
Precedence This number determines the map’s priority. Valid values are from 1
through 100.
Fabric Remap Priority The fabric remap priority of the port. Valid values are CoS 0 through CoS
6, and the default is CoS 0.
Lossless Remap Priority The FCoE lossless remap priority of the port. Valid values are CoS 0
through CoS 6, and the default is CoS 0.
QoS tab — Non-DCB mode (Ethernet PFC with Trust)
Mode The mode of Quality of Service (QoS) assigned to the port (non-DCB).
Field/Component Description