Network os – configure rx symbol errors monitor 3, Network os – configure standard l2 access list 3, Network os – create cos mutation map 3 – Brocade Network Advisor IP User Manual v12.1.0 User Manual

Page 1437: Network os – create lldp profile 3

Advertising
background image

Brocade Network Advisor IP User Manual

1383

53-1002947-01

CLI Templates

G

TABLE 43

Network OS – Configure RX Symbol Errors Monitor

Feature

Description

CLI Commands

Network OS

This template is used to configure
threshold and alert values for RX
Symbol Errors Monitoring.
Possible values for timebase are
day, hour, minute and none.
Buffer value cannot be more than
average of high plus low threshold.
Supported Values for High and Low
Threshold Action Parameters are
email, raslog, all, and none.

threshold-monitor interface custom type Ethernet area
SymbolErrors threshold timebase $<Timebase|STRING>
high-threshold $<HighThresholdValue|INTEGER>
low-threshold $<LowThresholdValue|INTEGER> buffer
$<BufferValue|INTEGER>
threshold-monitor interface custom type Ethernet area
SymbolErrors alert above highthresh-action
$<AboveHighThreshAction|STRING> lowthresh-action
$<AboveLowThreshAction|STRING>
threshold-monitor interface custom type Ethernet area
SymbolErrors alert below highthresh-action
$<BelowHighThreshAction|STRING> lowthresh-action
$<BelowLowThreshAction|STRING>
threshold-monitor interface apply custom-monitoring

TABLE 44

Network OS – Configure Standard L2 Access List

Feature

Description

CLI Commands

ACL

This template is used to configure
standard L2 ACL on Network OS
products running 3.0 or later.

mac access-list standard $<stdAclName|STRING>
deny $<denyMAC|MAC> $<mask1|MAC>
permit $<permitMAC|MAC> $<mask2|MAC>
permit any

TABLE 45

Network OS – Create CoS Mutation Map

Feature

Description

CLI Commands

QoS

This template is used to create the
CoS-to-CoS mutation QoS map
name

qos map cos-mutation $<MapName|STRING>
$<MapValue|STRING>

TABLE 46

Network OS – Create LLDP Profile

Feature

Description

CLI Commands

QoS

This template is used to create LLDP
profile and configure LLDP profile
parameters

protocol lldp
profile $<profileName|STRING>
description $<description|STRING>
hello $<frequency|INTEGER>
multiplier $<holdTime|INTEGER>
advertise dcbx-fcoe-logical-link-tlv
advertise dcbx-fcoe-app-tlv

Advertising