Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 158)

104 Brocade Network Advisor IP User Manual
53-1002947-01
Host discovery
4
FIGURE 45 Add Host Adapters dialog box
3. (Optional) Enter a discovery request name (such as, Manual 06/12/2009) in the Discovery
Request Name field.
4. Select Network Address from the list.
5. Enter the IP address (IPv4 or IPv6 formats) or host name in the Network Address field.
6. Click Add.
The IP address or host name of the Host displays in the Host List.
7. Configure Host credentials by choosing one of the following options:
• To configure HCM agent credentials, select the HCM agent option. Go to step 9 .
• To configure CIM server credentials, select the CIM server (ESXi only) option. Continue with
step 8 .
If you do not need to configure Host credentials, skip to step 13 .
8. Configure discovery authentication by choosing one of the following options:
• To configure discovery with authentication, select the HTTPS from the Protocol list.
• To configure discovery without authentication, select the HTTP from the Protocol list.
9. Enter the port number in the Port field.
HCM agent default is 34568. CIM server HTTPS default is 5989. CIM server HTTP default is
5988.
10. Enter your username in the User ID field.
HCM agent default is admin. Leave this field blank for the CIM server.
11. Enter your password Password field.
HCM agent default is password. Leave this field blank for the CIM server.
12. Repeat step 5 through step 11 for each Host you want to discover.