Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 215)

Brocade Network Advisor IP User Manual 161
53-1002947-01
SNMP Trap forwarding credential settings
6
Configuring SNMP v3 credentials
To configure a SNMP v1 or v2c credentials, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Trap Forwarding Credentials in the Category pane.
The Trap Forwarding Credentials pane displays ( Figure 64 ).
3. Enter the SNMP v3 name (case sensitive, 1 to 16 characters) to identify the credentials in the
User Name field.
Allows all printable ASCII characters.
4. Select on of the following authentication protocols from the Auth Protocol list.
• HMAC_MD5 (continue with step 5 )
• HMAC_SHA (continue with step 5 )
• NONE (go to step 6 )
5. Enter the SNMP v3 authentication password (case sensitive, 1 to 16 characters) in the Auth
Password and Confirm Password fields.
Displays as asterisks. Allows all printable ASCII characters.
6. Select one of the following privacy protocol types from the Priv Protocol list.
• CBC-DES (continue with step 7 )
• CFB_AES-128 (continue with step 7 )
• NONE (go to step 8 )
7. Enter the privacy password (case sensitive, 8 to 16 characters) in the Priv Password and
Confirm Password fields.
Displays as asterisks. Allows all printable ASCII characters.
8. Click Apply or OK to save your work.