Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1228)

1174 Brocade Network Advisor IP User Manual
53-1002947-01
Running a policy monitor
38
Running a policy monitor
Before you run a policy monitor, make sure your policy monitors are valid. Valid policy monitors
must have at least one policy selected with one or more targets. Management checks do not
require a target.
To run an existing policy monitor, complete the following steps.
1. Select Monitor > Policy Monitor.
The Policy Monitor dialog box displays.
2. Select the policy you want to run in the Monitors list.
3. Click Run.
When the policy monitor check is complete, the Policy_Name - Policy Monitor Report displays
(
Figure 458 ) in a web browser.
FIGURE 458 Policy_Name - Policy Monitor Report
4. Review the report details (refer to “Viewing a policy monitor report” on page 1175).
To export a report, refer to “Exporting a policy monitor report” on page 1177.
To e-mail a report, refer to “Exporting IP reports to e-mail recipients” on page 1268.
5. Click the close button (X) on the Policy_Name - Policy Monitor Report browser window.
6. Click Close on the Policy Monitor dialog box.