Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 69)

Brocade Network Advisor IP User Manual 15
53-1002947-01
Management server and client
1
24609 2 Reserved for future use TCP Not used Client - Server No
24610 2 Reserved for future use TCP Not used Client - Server No
24611 2 JBoss Transaction Services Recovery
Manager port TCP Not used remotely Server Yes
24612 2 JBoss Transaction Status Manager port TCP Not used remotely Server Yes
24613 2 JBoss Pooled invoker port TCP Not used remotely Server Yes
24614 2 JBoss Socket invoker port TCP Not used remotely Server Yes
24615 2 JBoss RMI dynamic class loading port TCP Web service port, not used
remotely Server Yes
24616 2 Apache JServ port TCP Proxys web server requests, not
used remotely Server Yes
24617 2 Remote Management application
connector access port TCP Not used remotely Server Yes
34568 HCM Agent discovery port TCP Used for HBA management via
JSON Server - Managed
Host Yes
55556 1 Launch in Context (LIC) client hand
shaking port TCP Client port used to check if a
Management application client
opened using LIC is running on
the same host
NOTE: If this port is in use, the
application uses the
next available port.
Client No
1. Port does not need to be open in the firewall for Professional edtion.
2. The default port number. You must use the same port number for all products or hosts managed by the Management server. This port is
configurable in the Management server; however, some products and firmware versions do not allow you to configure a port.
TABLE 5 Port usage and firewall requirements (Continued)
Port Number Ports Transport Description Communication Path Open in Firewall