Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 464)

410 Brocade Network Advisor IP User Manual
53-1002947-01
Configuration repository management
14
Scheduling switch configuration backup
NOTE
Only available for Fabric OS products.
NOTE
This feature requires a Trial or Licensed version.
NOTE
The Enhanced Group Management (EGM) license must be activated on a switch to perform this
procedure and to use the supportSave module.
You can schedule a backup of one or more switch configurations. If a periodic backup is scheduled
at the SAN level, that backup will apply to all switches from all fabrics discovered. Any new fabrics
being discovered are automatically added to the list of fabrics to be backed up.
NOTE
If a backup is scheduled for more than one fabric and some of the fabrics contain common
members, the backup will include the unique switch configuration values obtained from the fabrics.
NOTE
The Management application enables you to save the same switch configuration to the repository
using two methods: on demand (Configure > Configuration > Save) or by defining a schedule
(Configuration > Schedule Backup).
Use this procedure to create a scheduled back up of switch configurations to the repository. To
save switch configurations to the repository on demand, refer to
“Saving switch configurations on
demand” on page 408.
The configuration files are stored in the Management application database.
1. Select Configure > Configuration > Save on Schedule.
The Schedule Backup of Switch Configurations dialog box displays.