Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 188)

134 Brocade Network Advisor IP User Manual
53-1002947-01
Port Groups
5
6. Add ports to the group by selecting the port in the Available Ports list and clicking the right
arrow button.
NOTE
The Management port, peri port, and stack ports are not included in the Available Ports list.
The selected ports move from the Available Ports list to the Selected Ports list.
For VDX 6740 or VDX 6740-T devices, if you create a port group with a 40 GbE port and then
the 40 GbE port is broken out into 4 10 GbE ports, the 40 GbE port is automatically removed
from the port group. You must manually add the 4 10 GbE ports back into the port group.
This also occurs when you merge 4 10 GbE ports into a single 40 GbE port. If you create a port
group with 4 10 GbE ports and then merge the 4 10 GbE ports into a 40 GbE port, the 4 10
GbE ports are automatically removed from the port group. You must manually add the 40 GbE
port back into the group.
7. Remove ports from the group by selecting the port in the Selected Ports list and clicking the
left arrow button.
The selected ports move from the Selected Ports list to the Available Ports list.
8. Click OK.
Viewing port group properties
To view port group properties, complete the following steps.
1. Select Network Objects from the view list on the Product List toolbar.
2. Right-click the port group you want to view properties for in the Product List and select
Properties.
The Port Group Properties dialog box displays.
3. Review the information:
TABLE 21
Field/Component Description
Properties tab Select to display information about the group.
Name The unique name (maximum 64 characters) for the product group.
Description The description (maximum 255 characters) for the product group.
Creator The user name of the creator (for example, Administrator).
Ports tab Select to display information about products in the group.
Port Count The number of ports in the group.
Port Actions list Select one of the following options:
•
Enable
•
Disable
•
Display Attached Port Properties
Performance list Select to launch the real time or historical performance.
Identifier The identifier of the port.
Name The name of the port.