Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 953)

Brocade Network Advisor IP User Manual 899
53-1002947-01
LSP
30
8. Click Advanced Settings to establish traffic engineering parameters.
The RSVP LSP Advanced Settings dialog box has three tabs: Global, Paths, and Fast Reroute.
The default view is the Global tab (
Figure 331 ).
FIGURE 331 RSVP LSP Advanced Settings Global tab
From the Global tab you can set the following:
- Adaptive checkbox - Select the Adaptive checkbox to allow you to change parameters while
an LSP is in enabled state.
- Under Admin Groups settings use the Select buttons to use admin groups to manage CSPF
path selection by including or excluding network segments identified as admin groups. The
Admin Groups Selector dialog box displays (
Figure 332 ).
FIGURE 332 Admin Groups Selector dialog box