Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 521)

Brocade Network Advisor IP User Manual 467
53-1002947-01
Performance management
15
Performance management
NOTE
Wireless access points in adaptive mode do not display in the Management application.
Historical performance enables you to collect data from managed wireless devices. You can use
the provided data collectors or create your own data collectors.
Instructions for collecting historical performance data are detailed in “IP historical performance
monitoring” on page 1033.
Policy Monitors
Use this feature to provide best practice guidelines for network setup at the fabric, switch, port and
device level as well as software configurations at the product and the Management application
level.
Instructions for configuring policy monitors are detailed in Chapter 38, “Policy Monitor” and include
information about the following:
• “Adding a policy monitor” on page 1146
• “Editing a policy monitor” on page 1153
• “Configuration rules” on page 1154
• “Running a policy monitor” on page 1174
• “Viewing a policy monitor report” on page 1175
Fault management
Fault management enables you to monitor your network using the following methods:
• Monitor logs for specified conditions and notify you or run a script when the specified condition
is met.
• Create event-based policies, which contain an event trigger and action.
• Configure E-mail event notification.
Instructions for configuring fault management are detailed in Chapter 39, “Fault Management” .