Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 48)

xlvi Brocade Network Advisor IP User Manual
53-1002947-01
1 The Management application cannot discover or manage wireless access points running Mobility 5.1.
Network OS hardware and software support
Network Advisor 12.1.X supports the Network OS 3.0 firmware platform. For platform-specific
firmware requirements, if any, refer to the
Table 3 .
Table 3 lists the hardware platforms supported by this release of Network Advisor 12.1.X, the
terminology used in the documentation, as well as any specific firmware requirements.
What’s new in this document
The following changes have been made since this document was last released:
• Information that was added:
- Dashboard
 Product Status and Traffic dashboard
 IP Port Health dashboard
 New performance monitors
 Expand navigation bar
 Network Scope
 Time Scope
- View Management - new status icons
- FICON — Configuring a switch for FICON operation
Brocade 6650 Base L3 Router Data Center base L3 router FastIron 7.5 and later
Brocade 6650 Router Data Center router FastIron 7.5 and later
TABLE 2 IronWare-supported hardware (Continued)
Device name Terminology used in documentation Firmware level required
TABLE 3 Network OS-supported hardware
Device name Terminology used in documentation Firmware level required
Brocade VDX 2730 10 Gbps connection blade VDX 2730 10 Gbps connection blade 2.1.1_fuj
Brocade VDX 2740 switch VDX 2740 switch 4.0.0_bbd
Brocade VDX 6710 switch VDX 6710 switch 2.1 or later
Brocade VDX 6720-24 switch VDX 6720-24 switch 2.1 or later
Brocade VDX 6720-60 switch VDX 6720-60 switch 2.1 or later
Brocade VDX 6730-32 switch VDX 6730-32 switch 2.1 or later
Brocade VDX 6730-74 switch VDX 6730-74 switch 2.1 or later
Brocade VDX 6740 switch VDX 6740 switch 4.0 or later
Brocade VDX 6740-T switch VDX 6740-T switch 4.0 or later
Brocade VDX 8770-4 switch VDX 8770-4 switch 3.0 or later
Brocade VDX 8770-8 switch VDX 8770-8 switch 3.0 or later