Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 162)

108 Brocade Network Advisor IP User Manual
53-1002947-01
Host discovery
4
12. Click OK on the Add Host Adapters dialog box.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A Host Group displays in Discovered Hosts table with pending status. To update the status from
pending you must close and reopen the Discover Host Adapters dialog box.
13. Click Close on the Discover Host Adapters dialog box.
Importing Hosts from a VM manager
To discover Hosts from a discovered VM manager, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Click Add.
The Add Host Adapters dialog box displays.
FIGURE 48 Add Host Adapters dialog box
3. Enter a discovery request name (such as, MyVMManager) in the Discovery Request Name
field.
4. Select Hosts from VM Manager from the import by list.
5. Select All VM or an individual VM from the list.
6. Click Add.
All hosts which are part of a discovered VM manager and have a registered host name display
in the list. If no host with a registered host name exists, an error message displays. Click OK to
close the error message.