Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1210)

1156 Brocade Network Advisor IP User Manual
53-1002947-01
Configuration rules
38
Viewing configuration rule details
1. Select Monitor > Policy Monitor.
The Policy Monitor dialog box displays.
2. Click Add.
The Add Monitor dialog box displays.
3. Click the Switch/Router Checks tab.
4. Select Add > Configuration Rule.
The Add Configuration Rule dialog box displays ( Figure 455 ).
FIGURE 455 Add Configuration Rule dialog box
This Add Configuration Rule dialog box contains the following fields and components:
• Name — A unique name for the rule.
The name cannot be over 128 characters. The only special characters allowed are an
underscore (_) or space.
Network OS Interface Port
Profiled Checks whether the interface port profiled. This condition
should be used with in an interface block.
Matches - Lines in any order
port-profile-port
End: Network OS LAG
Interfaces !
TABLE 108 Port Profile Interface Rule expressions (Continued)
AND/OR ( Block/Condition Name ) Details - Description/Condition/Configuration