Ip deployment reports, Viewing a deployment report, Viewing a deployment report 4 – Brocade Network Advisor IP User Manual v12.1.0 User Manual
Page 1338: Ip deployment reports 4
1284
Brocade Network Advisor IP User Manual
53-1002947-01
IP Deployment reports
42
IP Deployment reports
Deployment reports provide information about deployments performed from the Management
application. These deployments include device configuration deployments, software image
backups, Realm Manager deployments, and configuration backups. The reports are available in
case administrators want to know whether a deployment succeeded or failed.
Deployment reports are not available for third-party devices.
Viewing a deployment report
1. Select Reports > Deployment.
The Configurations report displays in the web browser with the following details:
•
User list — Select one of the following options:
All — Select to see deployments for all users.
System User — Select to see deployments for the system user only.
Current User — Select to see deployments for the current user only.
•
Show auto registration events check box — Select to show auto registration events.
•
User — Name of the user that performed the deployment.
•
Configuration Name — Name of the deployment.
2. Click the link in the Configuration Name column to display the details of the deployment.
The Configuration Deployment Report displays in the web browser with the following details:
•
Configuration Name — Name of the deployment.
•
Deployment Time — Time when the deployment occurred.
•
User — Name of the user that performed the deployment.
•
Status — Status of the deployment.
If you select a report where all devices in that deployment have been deleted, an “associated
devices removed” message displays.
3. Click the link in the Deployment Time column to display the details of the deployment.
The Detailed Configuration Deployment Report displays in the web browser with the following
details:
•
Configuration — Name of the deployment.
•
Product — Product on which the deployment occurred.
•
Status — Status of the deployment.
•
Error — Any error messages.
4. To export a report to a file, refer to
“Exporting and saving IP reports to a file”
5. To e-mail a report, refer to
“Exporting IP reports to e-mail recipients”
6. To configure how often to purge deployment reports, refer to