Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1411)

Brocade Network Advisor IP User Manual 1357
53-1002947-01
IP device properties
E
System Name The name of the product.
IP Address The IP address (IPv4 or IPv6 format) of the product.
Product Type The fabric’s product type, which is a Layer 2 switch.
VCS Mode The VCS mode of the switch, which can be enabled or disabled.
VCS ID The VCS ID configured in the fabric.
Config Mode The configuration mode of the fabric, which is Local Only for a
management fabric and fabric.
Node Count The number of fabric nodes in the fabric.
Principal Switch The name and IP address of the principal switch.
Status The health status of the cluster.
Admin Status The administrative status of the switch, for example, Normal.
Memo Additional comments regarding the switch.
Vendor The switch vendor.
Model The switch model type (VDX 6710, VDX 6720, or VDX 6730).
Port Count The number of ports on the switch.
Firmware The firmware version and build number.
Location The physical location of the product. This is an editable field.
Contact The name of the person or group you should contact about the product,
for example, Technical Support. This is an editable field.
Description The description of the product.
Connected AP Count The number of AP devices connected to the device.
Add button Click to add a user-defined property. For more information, refer to
“Adding a property field” on page 1367.
Edit button Click to edit a user-defined property. For more information, refer to
“Editing a property field” on page 1367.
Delete button Click to delete a user-defined property. For more information, refer to
“Deleting a property field” on page 1368.
Nodes tab Select to display information about nodes on the fabric.
Name The name of the VCS fabric member.
Alias The fabric member alias name.
Host Name The host name associated with the VCS fabric member.
System Name The name of the switch.
IP Address The IP address of the switch.
System OID The system’s object identifier.
Product Type The fabric’s product type, which is a Layer 2 switch.
Serial # The VCS fabric member’s serial number.
VCS Mode The VCS mode of the switch, which can be standalone or VCS fabric.
VCS ID The VCS ID configured in the fabric.
Field/Component Description