Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1326)

1272 Brocade Network Advisor IP User Manual
53-1002947-01
IP Wired Products report
42
Detailed Product Report
To view the details of a Wired Products report, click the name of a wired product in the Wired
Products report. To launch the Detailed Product Report from the topology, right-click the product on
the Network Objects, L2 Topology, Ethernet Fabrics, IP Topology, or VLAN Topology view and select
Detailed Report.
NOTE
This report is not available for VCS clusters.
The Detailed Product Report displays ( Table 115 ).
TABLE 115 Detailed Product Report fields and components
Field/Component Description
System Information System information includes the following:
•
Alias Name — An optional name that is entered using the Properties dialog box. It
provides an alternate name for the product if you want to override the Host Name
and System Name values.
•
Host Name — The name that the Management application obtains from the product
during discovery. This may be the Domain Name System (DNS) name of the product,
but may come from other naming services, depending on the configuration of the
operating system on which the Management application is running.
•
System Name — The name the Management application retrieves from the
"sysName" SNMP MIB variable during discovery. This name corresponds to the
value specified by the hostname command in the product configuration file.
The Management application displays the first name it finds for the product in the
following order: Alias Name, Host Name, System Name. The Alias Name takes
precedence over Host Name, which takes precedence over System Name, and so
on.
•
Contact — A contact name for the product.
•
Location — The location of the product.
•
Serial Number — The serial number of the product. A serial number is not displayed
for products that support stacking. Serial numbers for these products are displayed
under the Stacking Units table.
•
Description — A description of the product.
Stacking Units This section only displays if the product is configured as a stacked device. It includes the
following:
•
Unit — The ID of the unit on the stack.
•
Present — Whether the stacked device is physically present.
•
Role — The role of the unit.
•
Model — The model number of the stacked device.
•
Firmware — The firmware level of the stacked device.
•
Priority — The priority bit of the stacked device.
•
Description — A description of the stacked device.
Stacking Port -
Realtime The name of the stacked device with drill-down support. When you click on the name, the
“IP Stacking Ports - Realtime report” launches (refer to
“IP Stacking Ports - Realtime
report” on page 1282).
Admin Status Admin status information includes the following:
•
Status — Whether the product is in normal operating mode or troubleshooting
mode.
•
Status Last Updated — When the last status update occurred.
•
Memo — A memo for the product.
•
Memo Last Updated — When the last memo update occurred.