Hyperedge – stack enable 7, Hyperedge – stack disable 7, Hyperedge – stack port creation 7 – Brocade Network Advisor IP User Manual v12.1.0 User Manual
Page 1431: Hyperedge – stack port deletion 7, Hyperedge – stack trunk creation 7, Hyperedge – stack trunk deletion 7, Hyperedge – peri port creation 7, Hyperedge – peri port deletion 7
Brocade Network Advisor IP User Manual
1377
53-1002947-01
CLI Templates
G
TABLE 14
HyperEdge – Stack Enable
Feature
Description
CLI Commands
HyperEdge To enable stacking mode.
stack enable
TABLE 15
HyperEdge – Stack Disable
Feature
Description
CLI Commands
HyperEdge To disable stacking mode.
stack disable
TABLE 16
HyperEdge – Stack Port Creation
Feature
Description
CLI Commands
HyperEdge To create stacking ports.
stack unit $<STACKID|INTEGER>
stack-port $<STACKID1/SLOT/PORT|STRING>
$<STACKID2/SLOT/PORT|STRING>
TABLE 17
HyperEdge – Stack Port Deletion
Feature
Description
CLI Commands
HyperEdge To delete stacking ports.
stack unit $<STACKID|INTEGER>
no stack-port $<STACKID1/SLOT/PORT|STRING>
$<STACKID2/SLOT/PORT|STRING>
TABLE 18
HyperEdge – Stack Trunk Creation
Feature
Description
CLI Commands
HyperEdge To create stacking trunks.
stack unit $<STACKID|INTEGER>
stack-trunk $<SRC_STACKID/SLOT/PORT|STRING> to
$<DST_STACKID/SLOT/PORT|STRING>
TABLE 19
HyperEdge – Stack Trunk Deletion
Feature
Description
CLI Commands
HyperEdge To delete stacking trunks.
stack unit $<STACKID|INTEGER>
no stack-trunk $<SRC_STACKID/SLOT/PORT|STRING> to
$<DST_STACKID/SLOT/PORT|STRING>
TABLE 20
HyperEdge – Peri Port Creation
Feature
Description
CLI Commands
HyperEdge To create peripheral ports.
stack unit $<STACKID|INTEGER>
peri-port $<STACKID/SLOT/PORT|STRING>
TABLE 21
HyperEdge – Peri Port Deletion
Feature
Description
CLI Commands
HyperEdge To delete peripheral ports.
stack unit $<STACKID|INTEGER>
no peri-port $<STACKID/SLOT/PORT|STRING>