Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 154)

100 Brocade Network Advisor IP User Manual
53-1002947-01
Individual IP device discovery
4
a. Click the SNMPv1/v2c Read Only tab.
b. Enter the unique community string in the Community field.
The community string can be from 1 through 16 characters long, case sensitive, and
allows all printable ASCII characters. The string displays as asterisks.
NOTE
If you do not enter a community string in the field, discovery uses the "public" and "private"
community strings to probe the devices.
9. Change the Read/Write credentials by completing the following steps.
a. Click the Read/Write Credentials tab.
FIGURE 41 Read/Write credentials
b. Enter the password in the Super-User Password field.
The password can be from 1 through 200 characters long, case sensitive, and allows all
printable ASCII characters. Not applicable to DCB devices.
c. Change the unique user name in the Login Prompt User Name field.
The user name can be from 1 through 200 characters long, case sensitive, and allows all
printable ASCII characters.
d. Change the password in the Login Prompt Password field.
The password can be from 1 through 200 characters long, case sensitive, and allows all
printable ASCII characters. The password display as asterisks.
e. Change the unique user name in the Enable Prompt User Name field.
The user name can be from 1 through 200 characters long, case sensitive, and allows all
printable ASCII characters. Not applicable to DCB devices.
f. Change the password in the Enable Prompt Password field.
The password can be from 1 through 200 characters long, case sensitive, and allows all
printable ASCII characters. The password display as asterisks. Not applicable to DCB
devices.