Management groups, Management groups overview, Displaying network object view – Brocade Network Advisor IP User Manual v12.1.0 User Manual
Page 175: Chapter 5, Chapter 5, “management groups
Brocade Network Advisor IP User Manual
121
53-1002947-01
Chapter
5
Management Groups
In this chapter
•
Management groups overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
•
•
Management groups overview
The Management application enables you to group multiple devices or ports so that you can
configure common configurations and perform common monitoring functions for them. You
configure management groups through the Network Objects view.
The Network Object view lists the discovered products, default and user-defined product groups,
and user-defined port groups. You can use Network Object view to do the following:
•
Add devices to product groups.
•
Remove devices from product groups.
•
Add ports to port groups.
•
Remove ports from port groups.
•
Synchronize the device configuration with the Management application database before the
next Discovery process runs.
The number of devices, device groups, and port groups that Network Object view can manage
depends on the disk space available to the Management application. However, adding many
devices and groups could affect system performance.
Displaying Network Object view
To display the Network Object view, select Network Objects from the view list on the Product List
toolbar.
The Management application displays a list of discovered products as well as any product and port
groups in a table (Product List). For more information about the Network Object view, refer to
You can perform the following actions from the Network Object view:
•
To configure product groups, refer to
•
To configure port groups, refer to
•
To search for a product in the Network Object view, refer to